Workwear often contains logos and inscriptions applied using iron-on stickers. These can be company logos or markings indicating affiliation with a specific position. But what to do if you need to remove these inscriptions? Today we will look at the main types of inscriptions, methods for removing iron-on stickers, step-by-step instructions on how to remove inscriptions on workwear and care for products after removal.
Types of inscriptions and iron-on stickers
Before you start removing inscriptions from workwear, it is worth understanding what type of iron-on stickers are used. There are several main types:
- Thermal printing is one of the most common methods of applying inscriptions. A press is used that heats a special thermal transfer print and attaches it to clothing. Such stickers can be either single-use or multiple-use.
- Imprints and stickers are materials that are applied using an iron or a heat press. When heated, the adhesive on the applique is activated and firmly bonded to the fabric.
- Adhesive-based prints and inscriptions - usually made of vinyl and also require heat to adhere to the surface of the clothing.
Each of these types requires a special approach, as the composition of the adhesive and the materials of the sticker may vary.
The most effective methods
If you want to know how to remove an iron-on sticker from workwear, here are a few methods:
- Heat exposure is one of the most effective ways to remove iron-on stickers. It is important to use an iron or hair dryer to heat the sticker and weaken the glue. Warm up the area with the iron-on sticker, and then carefully remove it.
- Freezing - suitable for some types of stickers and prints. Under the influence of low temperatures, the glue becomes more brittle, which makes it easier to remove. Place the clothing in a plastic bag, leave it in the freezer for a few hours, and then try to remove the sticker.
- Chemical exposure - cleaners for removing iron-on stickers can be found in household chemical stores. Apply a small amount of the product to the sticker, wait a few minutes and carefully remove it. Before removing the inscription on workwear, be sure to read the instructions for the chemical agent and the product information on the label. Some compounds can damage the fabric.
Step-by-step instructions for removing a heat-sealed sticker
Taking into account the above methods, let's look at the step-by-step instructions for removing an iron-on sticker from work clothes:
- Prepare your clothes and work area. Place the fabric on a flat surface so that it is convenient to work.
- Choose a removal method. To do this, it is important to understand what type of sticker and fabric you have in front of you. For example, heat-transfer stickers are often better removed with heat, while vinyl stickers are better removed with chemicals.
- Use an iron. Heat the iron to medium temperature (without steam) and apply it to the sticker through a thin cloth or parchment paper. Hold the iron in place for 10-15 seconds, then try to carefully remove the edge of the sticker. If it comes off easily, continue the process carefully.
- Carefully pry the sticker. After heating, carefully pry the edge with a knife or spatula. Work slowly to avoid damaging the fabric.
Efficient removal of adhesive residue
Unfortunately, often traces of glue remain in the place where the sticker was. Here are several ways to remove them:
- Alcohol. Rubbing alcohol is suitable for most fabrics and effectively dissolves glue. Wipe the area with rubbing alcohol, but make sure the fabric will not be harmed by this action.
- Acetone. Suitable for durable fabrics, but not recommended for delicate materials.
- Vinegar. This is a natural remedy that also helps remove glue. Apply vinegar to a cotton pad and wipe the stain. Vinegar is less aggressive than alcohol, so it is suitable for most materials.
- Oil. Some glues can be resisted with vegetable oil. Apply a small amount to a cotton pad and gently wipe the area, but be careful with fabrics that can absorb oil.
Caring for clothing after removing stickers
If the logo removal from workwear was successful, it is important to properly care for the item so that it retains its original appearance. Jackets, T-shirts, hoodies should be thoroughly washed to remove residue from cleaning agents and soften the fabric. It is recommended to use a gentle washing cycle and a detergent without bleach to avoid discoloration.
Recommendations:
- Do not wash workwear in hot water, as this may change the structure of the fabric.
- Use fabric conditioner to soften the areas where the sticker was.
- After washing, check the clothes for adhesive residue. If necessary, repeat the removal with alcohol or vinegar.
Wide range of workwear from "Tog Trade"
If you need high-quality winter or summer workwear without unnecessary logos or with the ability to apply them, we recommend that you contact the online store togtrade.com. Here you will find a wide range of workwear for various industries - from construction to agriculture. Workwear from "Tog Trade" is distinguished by high quality and convenience, which ensures reliability and comfort in use.
Write a comment